|Home||» Products||» Semi-Metallic Gaskets||» Double Jacketed Gasket|
Double Jacketed Gasket
- Graphite, Metal, Other
- Flat Gasket
- Main Export Market(s)
- Asia, Central America, North America, South America, Middle East, Africa
- Main Domestic Market
- All India
- ISO 9001:2008 ISO 14001:2004 OHSAS 18001:2007 API 6A API 17D
Double Jacketed Gasket
The gaskets with all-metal outer shell and either a metallic or non-metallic closed fiber sealing material is Metal Jacketed Gasket where the filler physical offers resiliency and metal jacket gives protection to the filler and eludes temperature, pressure and corrosion.
Metal jacketed gaskets manufactured at our company are employed as heat exchanger gaskets. These are also used in valves, pumps etc despite of their confined recovery and elasticity property. Gasket sealing is trenchant under advanced bolt loads, sleek flange surface finishing and flange levelness.
The gasket substantial utilized for the construction are:
Metallic category comprises of Soft iron, Stainless Steel, Inconel, Monel, Nickel, Aluminum, Brass, Carbon Steel, Copper etc. Non-Metallic collection includes PTFE, Tanged insert graphite, compressed fiber mill-board, Ceramic etc.
The kinds of Metal Jacketed Gaskets we offer are:
|Single Jacketed Gaskets |
Filler material boxed-in in a metal jacket, layering the outside and inside diameter of gasket.
|Type 120||One contact surface covered||Narrow flange breadths in circular & non-circular designs|
|Type 124||Overlapped single jacketed variety with filler besieged on inside, outside diameter as well as on contact surfaces||Pumps, compressors, Boiler, diesel & gasoline engines.||High temperature gasket utilization & narrow gasket width [6.4mm (min)] & nominal thickness 3.2mm|
|Double Jacketed Gaskets |
Filler material boxed-in by the two piece metal jacket screening both inside and outside diameters as well as both contact surfaces. Gasket breadth as narrow as 8mm can be made-up. Minimal thickness 3.2mm. With either built-in/welded pass divider bars with good bolting.
|Type 123||Both contact surfaces are covered.||Boiler gaskets, Heat exchanger gaskets.||High pressure/high temperature gasket utilization up to class 900|
|Type 126||Metal jacket ready-made of corrugated jacket as ridge forms multi-seals crosswise flange sealing face.||Finer resilience than Type 123.|
|Type 127||Two-fold shell gasket with two turned wrap-round shells||Simplicity of management, |
opposition to pressure
|French Type Gaskets |
Filler material included in metal jacket screening inside length of gasket & protection face on both sides.
|Type 130, 131, 132 ||Gasket width [6.4mm(min)] & minimal gasket thickness[3.2mm]||Space seals, valve bonnet fixings of low pressures||Small & large diameter in wide and narrow flange widths in round & non-circular designs.|
|Solid Corrugated Metal Gaskets |
Nonattendance of non metallic filler with ridges giving multi-seals across face of the gasket. Minimal 3 corrugations and gasket thickness as that of corrugation position that can be 3.2mm, 6.4mm, 4.8mm.
|Type 100, 102, 129. ||Also made in soft amenable facings such as PTFE, graphite etc.||Type 100 - Up to 500psi only. Type 102, 129 – Up to 1000psi. ||High temperature gasket usages and applications using water, gas, steam, oil etc.|